|
As seen at IMTS 2022. Dorian Tool’s Jet-StreamTM Thru Coolant Cutting Tools use a patented thru-coolant locking clamp which is precisely aimed to direct high pressure, high velocity coolant exactly onto the cutting edge of the carbide insert, from a short distance of 1⁄4”.  Dorian Tool Jet Stream through coolant system This controlled Jet-Stream coolant, directed onto the insert chip interface (right under the chip and over the insert cutting edge) will dissipate the generated heat very effectively as well as lubricate the cutting edge of the insert, causing the chips to hydroplane over the insert surface instead of adhering to it. As a result, the insert will operate at a constant low temperature, with a clean and undamaged cutting edge, changing the way metal is cut. Higher speeds and feeds can be achieved, with a better surface finish, tolerance control and machining performance. The insert life is extended up to 200%.
0 Comments
 NEW ENGLAND - F&L Technical Sales is excited to announce our new partnership with Platinum Tooling Inc. based in Prospect Heights, IL. Platinum Tooling is the sole importer of live tools, angle heads, and multiple spindle tools manufactured by Heimatec as well as the Tecnicrafts Swiss Collet and Guide Bushing line, Henninger Spindle Speeders, and AMF Markers and Cleaners.
|
ABOUT
This is where we publish technical articles, applications stories, tip and tricks, new product announcements and press releases. Archive
March 2025
Categories
All
|
RSS Feed
|
F&L Technical Sales Inc.
326 Woodland Way Russell, MA 01071 Established 1999
|
© 2024 F&L Technical Sales Inc.
All Rights Reserved site design: Rapid Production Marketing
|