US Manufacturing Technology Orders increased 45.4% from February 2021 and increased 66% over March 2020 in New England
U.S. Manufacturing Technology Orders totaled $437.9 million, an increase of 16.1% over February 2021 and an increase of 41.6% over March 2020, according to the latest U.S. Manufacturing Technology Orders report published by AMT...
by Kristin Bartschi May 10, 2021
Read the Full Press Release report below
Why is total cost per hole reamed far lower with carbide tipped reamers despite its higher initial cost?
Carbide runs at higher Higher feeds & speeds due to heat resistant cutting edges and this reduces your machine cycle time per part. Carbide also provides consistent quality: It maintains hole size and surface finish far longer than steel. That is a direct result of longer tool life which reduces down time for tool changes. At the end of the run, your shop is more profitable using carbide tipper reamers from Hannibal Carbide.
This is where we publish technical articles, applications stories, tip and tricks, new product announcements and press releases.
F&L Technical Sales Inc.
326 Woodland Way
Russell, MA 01071
© 2023 F&L Technical Sales Inc.
All Rights Reserved
site design: Rapid Production Marketing